Dent Instruments PowerScout PS3037 Network Power Meter
POWERSCOUT ™ 3037 REVENUE-GRADE SINGLE-POINT POWER METER

Dent PS3037
This power meter replaces the former PowerScout 3 plus model. Measurement capabilities include the ability to monitor voltage, current, power, energy and many other parameters.

Featuring a broadband power supply (80-600VAC) and the capability of being paired with a variety of current transformers, including split cores that measure 1A and RoCoils designed for measuring 4000A. Additionally, communications protocols are field-selectable, allowing users to easily toggle between Modbus or BACnet.

The PowerScout is designed to provide timely and accurate consumption data to gain the upper hand on electrical costs in today's escalating energy market. PowerScout meters can capture kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring on three-phase or single-phase circuit installations. The PowerScout's flexibility, size, and ease-of-use make them ideal tools for gathering detailed consumption data in commercial, industrial, government and retail environments.

Features
USB Port for Quick & Easy Setup: Simply connect the PS3037 to a PC, then use ViewPoint software to configure CT type, communication protocol, and other parameters.

Optional Display: The scrolling display can be used for quickly reading real-time values and performing diagnostics during setup. Without even connecting to a laptop, know that the meter is configured properly before leaving the job site.

Serial & Ethernet on the Same Unit. No longer be limited to choosing either Serial or Ethernet. All Ethernet units (PS3037-E-X) are equipped with both RS-485 and RJ-45 connections standard. Having both communication methods ensures maximum flexibility in the field.

DIN Rail Mounting: Compact enough to facilitate in-panel mounting. Use the angled mounting tabs to install flush on the side or back of the panel wall. Or, use the built-in DIN rail channel for quick and easy mounting near the circuit panel.

No Integral Voltage Leads: Voltage leads are now user-supplied. Because of this, there is no distinction between "US" and "INTERNATIONAL" PowerScout 3037 instruments. All configurations of the PS3037 can be used throughout the world (50/60Hz)

Revenue-Grade Performance: ANSI C12.20-2010 qualified Class 0.2

Over 50 measured parameters for energy measurement, monitoring and diagnostics. Monitors voltage, current, power, energy, and many other electrical parameters on single and three-phase systems.

Single or 3-phase energy and power meter for submetering applications

Choose from a full range of Split-Core or RoCoil™ Rogowski-style current transformers

Patented PhaseChek™ LED indicators ensure correct CT orientation during installation

Line-Powered
Equipped with industry-standard Modbus and BACnet Communications

Data updates occur every 0.5 second

ViewPointSetup Utility software: Verify meter installation, switch between communication protocols, and check real-time values before leaving the job site. ViewPoint 4.0 or later required for the PowerScout 3037.

UL & CE Mark

Applications
Tenant submetering
Net metering
Data center
Monitoring
Commercial
Retail
Industrial

Dent CT-R47-A4-U
Specifications Electrical Output Signal 131 mV/1000A at 60 Hz 109.2 mV/1000A at 50 Hz Wire Colors White = (+) positive Brown = (-) negative Bare wire = shield Phasing Arrow points towards load Phase Shift 0.2° at 50/60 Hz Frequency Range 20 Hz to 5 kHz Useful Current Range 5 to 5000A AC Accuracy (typical)